PT&P Aids in the Creation of the "Chemical Island"

February 4, 2001

Piping Technology & Products, Inc. supplied more than 3,000 cold shoes, 400 slide plates and numerous more spring hangers, constants and fabricated pipe supports for the construction of a refinery plant on Jurong Island, Singapore. U.S. Bellows, Inc., also supplied many of the expansion joints used in the creation of this refinery.
Jurong Island is a man-made island consisting of four petroleum refineries, 30 petrochemical firms, and many more industrial firms to support its existence.

Tips on Corrosion Protection
There are four methods of protecting carbon steel pipe support components from corrosion; painting, zinc coatings, hot dip galvanizing, and combinations of these.  Painting has an advantage when appearance and choice of color are important. Modern painting systems may be appropriate protection in certain environments. Paint provides a barrier protection to a metal surface. The ability of zinc to provide cathodic protection for carbon steel in addition to barrier protection is a fundamental advantage. In most cases the reduction in life-cycle costs justifies the small additional cost of galvanizing. Indeed painting and galvanizing together can provide a synergistic benefit which may be justified in some cases.  For more information on corrosion, refer to https://devptp.fronekgrp.com/resources/technical-bulletins/corrosion-protection/

PT&P’s Diverse Product Testing
Piping Technology & Products, Inc. is a recognized leader in pipe supports, pre-insulated pipe supports, miscellaneous fabrication and expansion joints and has extensive experience with several different types of product testing. This includes :

* Load Testing : The objective of the load test is to determine the maximum load for pipe supports and other products. Load tests are done on an assortment of pipe supports.

* Snubber Testing : The objective of the snubber cycle test is to (1) display the normal wear and tear for a snubber over an extended period of time, and (2) display the resistance to an abrupt disturbance.

* Burst Testing : The objective of the burst test is to determine the ultimate pressure resistance. Primarily conducted on bellows.

See more about testing on our site:  Product Testing

Top