These constant spring supports for an ethane cracker for one of our largest and oldest customers who we worked with almost daily for years. As a matter of fact, a majority of the hangers in this plant are supplied by PT&P dating back to 1971. Today, the new cracker project was designed to take advantage of cheap shale-derived ethane feedstock.
The constant supports were supplied with horizontal travelers with a special “brush strip” help limit the entry of foreign objects. The constants are designed to support an 8” diameter pipeline leading into a furnace. Each spring coil is neoprene coated and the spring can housing is hot-dipped galvanized to protect against corrosion. This type of rigid spring hanger uses a coil or series of coils to accommodate pipe movement throughout the piping system. These particular constant assemblies are designed for horizontal movements ranging from 1” to 6.6” and loads up to 1320 lb. We can customize any material, finish, dimension, load, load adjustment, travel, and travel stops, as well as provide sensors for remote monitoring.
This project was unique in design and testing requirements requested by the client and their customer. Every constant support we build is load-tested by our quality and production teams. In some cases, the customer will ask to witness the testing of a single unit which we do on a regular basis. However, for this project, every constant spring was witness tested with the client’s inspection and engineering teams located at our manufacturing facility utilizing our custom in-house designed test machine.
