This engine exhaust duct spool is fabricated from carbon steel and coated with specialized paint that is capable of resisting temperatures up to 1,000ºF. It measures 6′ long and connects two exhaust manifolds of 18″ in diameter to a bottom flange of 50″ in diameter. This engine exhaust duct spool will be covered with insulation and will be used to direct engine exhaust in a gas storage facility.
Want to learn more about our miscellaneous fabricated products? Watch a past webinar!
These molecular sieve vessels are designed for a biofuel production line. They are fabricated from stainless steel with carbon steel base rings. The vessels have an outside diameter of 24″ and measures 214″ in length. The maximum allowable working pressure is 123 PSIG @ 400ºF. These ASME Code pressure vessels were hydro-tested at 160 PSIG and x-ray tested prior to being shipped to the customer.
Do you require ASME pressure vessels or tanks? Let us price them for you today!
The three pig launchers measure 127″, 172″, and 189″ in length and are designed for 263 PSIG at 185ºF. The pipe diameters of each unit measure 10″, 18″, and 20″, respectively. Two of the pig launchers/receivers are fabricated from carbon steel and one from stainless steel. All of the launchers/receivers were hydro-tested to ensure product quality.
Do you see a need for pig launchers in your piping system? Get pricing today!
Pressure Vessel
– Diameter: 48″ O.D.
– Capacity: 1,100 Gallons
– Material Fabricated From: Carbon Steel
– Design Temperature & Pressure: 285 PSIG at 100ºF
– Testing: Hydro-Tested and held for 1/2 hour at 428 PSIG
Do you have a need for a pressure vessel? Get pricing on a vessel today!
This pressure vessel measures 84″ in length and is fabricated entirely of SA516-70 carbon steel. It is designed for low temperature environments and has a design pressure of 117 PSIG at 500ºF. A hydrostatic test was completed at 205 PSIG prior to shipment.
Do you have a requirement for a pressure vessel in your plant? Get pricing today!
The duct work has an outside diameter of 90 inches and is 38 feet long. The duct assembly is fabricated entirely from ASTM A516-70 carbon steel. The assembly has two support bases and stiffening rings that provide strength and rigidity for the duct work. The assembly is a section of air supply duct in an Ammonia Plant.
Do you require duct work for your piping system? Get pricing today!
58″ Floating Rings for a Process Plant
– Sizes Range from 19″ I.D. to 91 1/2″ I.D.
– ASTM A-240 Grade 316H Stainless Steel
– 100% Dye Penetrant Tested on all Weld Seams
Want to learn more about the miscellaneous fabricated products we supply? Watch a webinar today!
SWECO Fab, Inc. designed and fabricated this transition piece for an ammonia plant in Egypt. The bottom rectangular flange measures 159″ long and 60″ wide. The top duct assembly has an outside diameter of 90″. The entire assembly measures 48″ high. The transition piece is fabricated from ASTM A516-70 carbon steel. It is used to connect a circular duct to a rectangular duct.
Want to learn more about the miscellaneous products we fabricate? Watch a Sweco webinar today!
26″ Hot Water Expansion Tank
– Material: .25″ Thick Carbon Steel
– Design Pressure: 50 PSIG
– Design Temperature: 200 F
– Capacity: 170 Gallons
Do you require a vessel or tank for your current or upcoming job? Get pricing today!
SWECO Fab, Inc. manufactured a pig launcher and receiver used to launch a pig throughout the piping system to clean the pipe line. Both the pig launcher and receiver have been hydro-tested to ensure quality and performance. Multiple coats of paint were also applied for environment protection.
Materials: API5LX52 Pipe
Design Pressure: 671 PSIG
Design Temperature: 175°F
Design Code: B31.8
Design Factor: 0.6
Want to learn more about pig launchers and receivers? Instantly view a webinar!
