| Type: | Constant Spring Supports |
| Material: | Carbon Steel | HDG | PTFE, 25% Glass Filled |
| Design: | 8,200 lb. Load | 11-1/2″ Total Travel |
| Testing: | Standard Load and Travel Test |
PT&P designed and manufactured 48 constant spring supports for a power plant in Mexico. The constants pictured above are Fig. 200 U-type constant spring supports fabricated from A-36 carbon steel and include PTFE, 25% glass-filled slide plates bonded to the load flange. The supports are 39″ H x 26″ W x 80″ L and are designed for operating loads up to 8,200 lb., with a total travel of 11-1/2″. These are horizontal constants designed to support piping from below in conjunction with a pipe saddle. All the constants went through standard load and travel testing per MSS Standards prior to shipment.
Constant spring supports find applications in various fields and can be made from diverse materials tailored to specific end applications. These supports are integral in industries such as petrochemicals, LNG, refining, power generation, steel mills, and geothermal plants, among others. In the past, obtaining a custom-designed constant spring support posed a significant challenge in terms of both design and manufacturing, with lead times extending to a minimum of 6-8 weeks.
Through a dedicated focus on manufacturing optimization and employing a design-centric engineering approach, we have successfully reduced the required time by more than half. Now, the process of acquiring custom constant spring supports is significantly streamlined. In fact, we are capable of fulfilling emergency orders in less than 24 hours, taking into account the client’s location and urgent requirements.
PT&P REF. ORIGINAL POST 08202017
