Piping Technology & Products custom-designed constant spring supports for crude oil processing at one of the largest refineries in the world. Petroleum refineries change crude oil into products such as jet fuel, gasoline, polypropylene, polyethylene, propane, sulfur, carbon black feed, and diesel that can be used for transportation, heating, feedstocks for making other chemicals, generating electricity, renewable energy, and paving roads. Piping Technology and Products was awarded this project because we were the only engineering manufacturing firm vendor of constant spring manufacturers in the world that could both design, manufacture, and test these units for the unique design conditions. These constant springs will support loads ranging from 88,185 lb. to 143,300 lb. They are designed for temperatures up to 650°F, and movements of 0.39" up, 4.72" down, -2.36" up, and 0.39" down. The Type-C constants are 67" H x 21" W x 88.25" L and the Type-F constants are 85" H X 39.75" W x 86.56" L.
The F-Type springs will include graphite slide plates and are designed to support the piping from below while allowing both lateral and axial movement. All constant assemblies underwent magnetic particle inspection of welds, travel, and compression tests. Additionally, a special “cramp test” was conducted on each spring coil. A "cramp test" is done by compressing the spring coil by a specified length for a specific period of time. This assures the spring’s functionally especially when a large "wire diameter" is used to manufacture the spring coil for these high loads. At Piping Technology and Products and our subsidiaries, we specialize in designing pipe supports, expansion joints, and insulated supports for unique applications involving products not readily available. Our products are used in the CDU (crude distillation units), hydrocracking units, RFCC (residual fluid catalytic cracking), naphtha hydrotreater, and hydrodesulfurization units (also known as alkylation unit), and sulphuric acid regeneration (SAR) units in refineries.
PT&P REF. ORIGINAL POST 07272021
