Constants for Energy Plant in Louisiana

July 1, 2005
Constants For Energy Plant In Louisiana
Constants for Energy Plant in Louisiana

Piping Technology & Products, Inc. custom designed and manufactured Type 200-C constant springboxes for an energy plant in Louisiana.

The constant measures 23 x 40 designed for an operating load capacity of 8,300 lbs. and a total travel range of 8. The constant is fabricated of A36 carbon steel. To ensure quality,
standard load and travel tests were performed prior to shipping.

Do you see a need for constant spring supports in your piping system? Get pricing today!
Request-A-Quote


Read More

Eight Custom-Built Variable Springs for a Power Plant

June 3, 2005
Eight Custom-Built Variable Springs For A Power Plant
Eight Custom-Built Variable Springs for a Power Plant

All of the spring components are made of A4150H and carbon steel. Per customer’s request, a two coat epoxy paint was applied to the springs. The Type-A variable spring assemblies measure 22″ x 79″ with an installed load of 45,000 lb., operating load of 56,000 lb., and a downward travel of 5″. The Type-C assemblies measure 22″ x 89″ with an installation load of 38,000 lb., operating load of 47,000 lb., and a downward travel of 5 1/2″. Each spring coil was tested to insure the wire diameter, coil height, and spring rates.

Do you see a need for variable springs in your piping system? Get a price quote today!


Request-A-Quote


Read More

Custom Designed and Manufactured Box Design Constants

April 29, 2005
Custom Designed And Manufactured Box Design Constants
Custom Designed and Manufactured Box Design Constants
Custom Designed And Manufactured Box Design Constants
Front View

These constants are manufactured from A36 carbon steel and measure 11″ x 29″ x 61″. Total weight of each constant is 430 lb. The loaded capacity is 2,160 lb. and the maximum travel is 15″. Standard load and travel test were done to ensure quality and performance. The turn around for this product was four days.

Custom Designed And Manufactured Box Design Constants
Side View

 

 

 

 

 

 

Do you require custom constants for your piping system? Get a price quote today!
Request-A-Quote


Read More

58,000 lb. Load Constant Hangers for an Oil Refinery

April 15, 2005
58,000 Lb. Load Constant Hangers For An Oil Refinery
58,000 lb. Load Constant Hangers for an Oil Refinery

 

58,000 Lb. Load Constant Hangers For An Oil Refinery
58,000 lb. Load Constant Hangers for an Oil Refinery

Piping Technology & Products, Inc. recently custom designed and fabricated PTP Fig. 200 Constant Hangers for a coker unit in St. Croix.

These supports, with operating loads ranging from 4,000 lb. to 58,000 lb., will be used to support flue gas ducts at the oil refinery. The overall lengths of the Horizontal Constants are 5′ to 7′, and the heights of the Vertical Constants ranged from 4′ to 6′. The combined weight of the constants totaled over 24,000 lb. Color-coded rivets for hot and cold loads and universal locking devices are also installed per customer’s request.

Do you require constant load hangers in your piping system? Let us quote them for you today!
Request-A-Quote


Read More

Upthrust U-Type Constants for Plant in Mexico

March 18, 2005
Upthrust U-Type Constants For Plant In Mexico
Upthrust U-Type Constants for Plant in Mexico
Upthrust U-Type Constants For Plant In Mexico
Upthrust U-Type Constants for Plant in Mexico

The constants‘ dimensions are 25” x 56” with 17” pipe OD, and 29” x 68” with 21” pipe OD. These constants have a loaded capacity of 8,400 to 17,800 lbs. This constant is designed to support piping from below. The tests that were conducted on this product were standard loading and travel testing to ensure quality and performance. The constant is manufactured from A36 carbon steel.

Do you require constant spring supports in your piping system? Get pricing now!
Request-A-Quote


Read More

Spring Supports with PTFE, 25% Glass Filled, Slide Plates

March 11, 2005
Spring Supports With Ptfe, 25% Glass Filled, Slide Plates
Spring Supports with PTFE, 25% Glass Filled, Slide Plates

Piping Technology & Products, Inc. recently custom designed and manufactured 32 spring supports with PTFE, 25% glass filled, slide plates for a plant in China. The total weight of the spring supports supplied is 13,143 lbs. and they have a travel range of ¾”. These products support the vessel and the PTFE, 25% glass filled, slide plates allow height adjustment as well as mobility. These spring supports are designed for operating loads of 42,266 lbs. and were constructed of carbon steel.

Do you require spring supports or slide plates in your piping system? Get pricing now!
Request-A-Quote


Read More

PTP 200 F-Type Constants

February 25, 2005
Ptp 200 F-Type Constants
PTP 200 F-Type Constants
Ptp 200 F-Type Constants
PTP 200 F-Type Constants

The constants measure 35” x 12” x 20 ¼” and 29” x 10” x 19 ½”. The products have a maximum travel of 5” and can support loads up to 790 lbs. and 430 lbs. They are constructed of A36 steel with a hot dip galvanized finish. The frames on the custom designed constants were elongated to meet customer’s specifications. Standard load and adjustment testing was performed to ensure quality prior to shipping.

Want to learn more about constant supports? View a past constant webinar today!


Access-Our-Webinar-Archives



Read More

Horizontal U-Type Constants for Power Plant

February 11, 2005
Horizontal U-Type Constants For Power Plant
Horizontal U-Type Constants for Power Plant
Horizontal U-Type Constants For Power Plant
Finished Products Ready for Shipment

The constants measure 61 x 17 x 40 and weighs 560 lbs. a piece. They are designed to operate in temperatures from -40° F to 660° F. The unique construction of the constants permits extensive vertical travel, ranging from 20.5 to 26. Standard load and adjustment testing was performed to ensure quality prior to shipping.

Do you require u-type constants in your piping system? Let us price them for you!
Request-A-Quote


Read More

Custom Variable Boiler Spring Assemblies

January 21, 2005

 

Custom Variable Boiler Spring Assemblies
Custom Variable Boiler Spring Assemblies

Piping Technology & Products, Inc. recently custom designed and fabricated 63 variable spring assemblies used to support a boiler in a power plant.  Three sets of custom springs were designed for this project. The first group measures 14 x 14 x 17 1/8 and can support 45,000 lbs. per inch. The next group can support up to 28,000 lbs. per inch and measures 16 x 16 x 17 11/16. The third group measures 15 x 15 x 17 9/16 and can support 38,000 lbs. per inch. The coils in the assembly are made from 2 15/16 diameter coil with 2 3/4 or 3 active coils.

The variable spring assemblies are carbon steel with an inorganic zinc primer finish. The spring coils are A4161-H material with a neoprene exterior coating. Each spring coil was tested to insure the wire diameter, coil height and spring rates met customer specifications.

Do you require custom variable spring assemblies like those described above? Get pricing today!


Request-A-Quote


Read More

Vertical Constant Supports for a Refinery

January 14, 2005
Vertical Constant Supports For A Refinery
Vertical Constant Supports for a Refinery

Piping Technology & Products, Inc. custom designed and manufactured eight Type F vertical constant supports for a refinery in Ohio.  The constants are capable of supporting 2,000 to 3,500 lbs. and have a maximum travel of 5. They are constructed of carbon steel and each weighs 270 lbs. Standard load and adjustment testing was performed to ensure quality prior to shipping.

Do you have a need for constant spring supports in your plant or refinery? Get pricing today!
Request-A-Quote


Read More
Top