Blog Category: FABRICATED PIPE SHOES, GUIDES & ANCHORS

Hold-Down Pipe Clamps Designed for a 36″ Diameter Natural Gas Pipeline
June 4, 2024

Hold-Down Pipe Clamps Designed For A 36&Quot; Diameter Natural Gas Pipeline

Type: HD-2 Hold-Down Pipe Clamps
HD Size: 36″ Dia. x 12″ W x 8-7/16″ H
Wedge Size: 23-3/16″ L x 6″ W
Material: Carbon Steel | PTFE
Testing: Standard Q.C. Tests

PT&P designed 50 HD-2 hold-down pipe clamps with pipe wedges for a natural gas pipeline in Texas. They were fabricated from carbon steel and include PTFE slide plates. The hold-downs are designed for a 36" pipeline, and are 12" wide by 8-7/16" tall. The wedges are 23-3/16" long by 6" wide. They are designed for an operating temperature of 400°F and have an adjustable height. Standard quality control tests were performed prior to shipment.

The natural gas pipeline network in the United States is indeed extensive, with over 3 million miles of pipelines crisscrossing the country. These pipelines play a crucial role in transporting natural gas from production sites, such as gas wells and processing plants, to distribution centers and ultimately to consumers, including both commercial and residential users. This vast network ensures that natural gas, an essential energy source for heating, cooking, and electricity generation, reaches homes and businesses across the nation reliably and efficiently.

At Piping Technology and Products, we specialize in custom designed Hold Downs meeting the requirements for a large array of clients. Hold down clamps are a versatile pipe support used in various industries and applications to secure pipelines and they play a crucial role in ensuring workpiece stability, precision, and safety across a wide range of processes in the chemical, refinery, power plant industries.

PT&P REF. ORIGINAL POST 04082019

Read More

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility
November 14, 2023

36” Dia. Cryogenic Pipe Saddles Designed For A Lng Facility

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

PT&P custom-designed pipe saddles with micarta base insulation for an LNG facility in Australia. The saddles were fabricated from 304L stainless steel plates with thickness ranging from 1/8″ to 3/8″. The micarta blocks range in thickness from 1/4″-3″. The saddles were designed to support pipes up to 36″ in diameter at an operating temperature of -300°F. Standard Q.C. and dimensional tests were performed prior to shipment.

A pipe saddle is any pipe support that cradles a pipe and transfers the pipe’s load weight onto a supporting base. Much like a saddle on a horse supports a rider and keeps them from bouncing on the animal, pipe saddles support a pipe’s weight. Pipe saddles are commonly used on large-diameter piping where the load is exceptionally heavy or when contraction-expansion movement is expected. Pipe saddles are welded to the pipe and are used in conjunction with roller supports or on-beam supports.

With the current uptick in global LNG demand driving US-based LNG production, Piping Technology and its subsidiaries are well-positioned to support large-scale projects in a timely manner. Our engineering and production teams work closely with our clients to ensure site, operator, and design needs are met. LNG demand is positioned to continue to grow over 60% by 2035.

PT&P REF. ORIGINAL POST 10232015

Read More

Clamped Pipe Shoes Custom-Designed for an Offshore Vessel Project
August 22, 2023

Clamped Pipe Shoes Custom-Designed For An Offshore Vessel Project

These special clamped pipe shoes with isolators were supplied for an offshore vessel project. Offshore renewable energy companies are exploring the viability of developing an offshore charging facility for electrified vessels and using ammonia-powered or hydrogen-powered fuel cells to power marine vessels. As the world’s only major Expansion Joints and Engineered Pipe Supports manufacturer, we are uniquely positioned to service various piping needs. The 210 pipe shoes were fabricated from carbon steel for pipe sizes ranging from 1″ to 24″ in diameter. They are supplied with a hot-dipped galvanized finish for corrosion resistance and range in length from 8″ to 16″ with 4″ from the BOP. These pipe shoes include a dampening isolator in between the pipe and the shoe to reduce vibration and noise. The isolator pad is typically made of a “rubber bonded cork elastomeric” which can be designed to suit the application for temperature and other system needs as specified.

1,485 supports were supplied for this order, including these pipe shoes. At Piping Technology and Products, we supply products to facilities that are helping to reduce carbon emissions and dependence on fossil fuels.

PT&P REF. ORIGINAL POST 06292021

Read More

Standard Pipe Support Components Available on Amazon
September 21, 2022

Need a standard product quickly? Or know what you need and don’t need a quote? Skip the line and order through Amazon. From forged carbon steel turnbuckles and light or heavy 2-bolt, 3-bolt pipe clamps, riser clamps to long tangent u-bolts, we stock standard sizes for your quick-turn orders.

*If you need assistance, we are always available 24×7 via our emergency service or just send an email to info@devptp.fronekgrp.com.

 

Ptp Fig30 Forgedcsturnbuckle
Fig. 30 Forged Carbon Steel Turnbuckle		 Ptp Fig60 Heavy 2 Bolt Pipe Clamp
Fig. 60 Heavy Two-Bolt Pipe Clamp
Ptp Fig70 Light 3 Bolt Pipe Clamp
Fig. 70 Light Three-Bolt Pipe Clamp		 Ptp Fig80 Heavy 3 Bolt Pipe Clamp
Fig. 80 Heavy Three-Bolt Pipe Clamp
Ptp Fig90 Riser Clamp
Fig. 90 Riser Clamp		 Ptp Fig100 Long Tangent U Bolt
Fig. 100 Long Tangent U-Bolt
Ptp Fig90 Riser Clamp
Piping Technology & Products, Inc. Expansion Joint (85 PSI)		 Ptp Fig100 Long Tangent U Bolt
Piping Technology & Products, Inc. Expansion Joint (150 PSI)
Ptp Fig90 Riser Clamp
Piping Technology & Products, Inc. Expansion Joint (300 PSI)
Read More

230 Chromoly Pipe Shoes & Clamps for a Natural Gas-Fed Ammonia Plant
September 27, 2021

230 Chromoly Pipe Shoes &Amp; Clamps Custom-Designed For Service At A Natural Gas-Fed Ammonia Plant

PT&P custom-designed 230 Chromoly pipe shoes & clamps for service at a natural gas-fed ammonia plant. The pipe shoes are designed for 1″ to 42″ diameter pipelines and coated with red epoxy for high temperatures (above 750°F). Each pipe shoe design utilizes custom two-bolt pipe clamps manufactured from 387 GR. 11 CL 2 material. This design is especially useful when welding to the process pipe is prohibited. These shoes clamp around the pipe instead of welding to the pipe in order to support a given load. Special bolting is required for high temperatures utilizing A 193 GR. B16 bolting material. Quality assurance inspection was conducted prior to shipment.

Read More

Hold-Down Clamps for a Waste Disposal Facility
September 4, 2021

Hold-Down Pipe Clamps For A 20&Quot; Pipeline At A Waste Disposal Facility

These hold-down pipe clamp assemblies are specially fabricated and include wedges with 25% glass-filled PTFE to absorb vibration and also serve as a buffer between the steel pipe and pipe support. Vibration can occur in Power, Solar, Biofuels, and Chemical plants because of flow-induced and/or acoustic-induced vibration due to the flow of fluids or gas/steam through the piping system. Similarly, vibration can occur in pipelines near rotating equipment such as reciprocating pumps and compressors resulting in pulsations or mechanical forces that can occur in both onshore or offshore production facilities. Vibration can be strong enough to cause premature failure or cracks resulting in unplanned shutdowns. These units shown in the photograph are custom-designed for pipe sizes up to 20″ in diameter and temperatures up to 200°F and can be adjusted to accommodate a range of heights for the T.O.S to the B.O.P. They are 21″ wide x 26″ long x 23″ high and are proven to greatly reduce vibration to acceptable levels. These hold-down pipe clamps are fabricated utilizing A 36 carbon steel plate and A 307 Gr. All-threaded rods. All components were hot-dipped galvanized and a quality control inspection was performed before shipment.

Read More

Hold-Down Pipe Clamps for a Steam Methane Reformer (SMR) Supplying High-purity Hydrogen
September 23, 2020

Hold-Down Pipe Clamps Designed To Limit Vibration Caused By Rotating Equipment And Avoid Damage To The Surrounding Piping System

PT&P has extensive experience involving the custom design and fabrication of hold-down pipe clamps for piping systems and skid mounted units for the power, chemical, and refineries industries throughout the world. These hold-downs are custom designed to limit vibration caused by rotating equipment and avoid damage to the surrounding piping system. They are fabricated from carbon steel with a hot-dipped galvanized coating and include PTFE slide plates to reduce the friction between the pipe and clamp, combined with fabric pads to reduce vibration dampening. The hold-downs are designed for pipelines ranging in 2” to 16” diameter. They range from 3″ wide x 9-1/8″ long to 8″ wide x 25-3/4″ long, and designed for an operating temperature of 200°F. We performed a Q.C. visual inspection prior to shipment. PT&P can custom design and fabricate hold-downs for any pipe size application. In addition to hold-downs, PT&P also offers other types of vibration control devices to accommodate different pipe orientations and locations.

Read More

Hold-Down Pipe Clamps with Slide Plates for LNG Service
October 19, 2018

Hd-2 Hold-Down Pipe Clamps With Ptfe Slide Plates Designed For An Lng Plant In Australia

Type: Hold-Down Pipe Clamps
Size: 8″ Dia. Pipe
Material: Carbon Steel | HDG
Design: Up to 400°F Temperatures

PT&P designed and manufactured standard HD-2 hold-down pipe clamps for an LNG plant in Australia. They are fabricated from hot-dipped galvanized carbon steel and include PTFE slide plates. The hold-downs are designed for 8″ diameter pipe and an operating temperature up to 400°F. The HD-2 is a restraint type hold down which allows axial movement while restraining lateral movement.

Read More

110 Custom Pipe Clamps for a Construction Company
April 30, 2018

110 Custom Designed Pipe Clamps For A Construction Company In Ohio

Type: Pipe Clamps
Size: 12″ wide | 42″ Dia. pipe
Material: A36 carbon steel with PVC pad
Testing: Standard Q.C. Inspections

Piping Technology and Products, Inc. custom designed a total of 110 pipe clamps for a construction company in Ohio. The pipe clamps are fabricated from A36 carbon steel with PVC pad bonded to the clamp’s inside radius. The pipe clamps have a physical size of 12” wide, for a 42” diameter pipe. Standard QC inspections were performed with a turn-around time of 8 weeks.

Read More

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas
March 20, 2017

Custom Designed Bolt Cradle Supports For A Chemical Plant In Texas

Type: Custom Bolt Cradle Pipe Supports
Size: 24″ to 36″ Diameter Range
Material: Hot-dipped Galvanized Carbon Steel | Gasket Sealing Material
Testing: Dimensional and Visual Inspection

These supports are custom designed similar to a PTP Fig.900 bolt cradle support. They are fabricated from hot-dipped galvanized carbon steel and were designed for pipe sizes ranging from 24″ to 36″ in diameter. The assemblies include a gasket sealing material that will be installed between the pipe shoe and pipe. The pipe supports underwent dimensional and visual inspection, and stainless steel tags were riveted to the shoes prior to shipping to a chemical plant in Texas.

Read More
Top