Blog Category: FRP PIPE SUPPORT

FRP Wear Pads with Epoxy Adhesive Supplied for LNG Service
January 27, 2020

 

FRP Wear Pads for an LNG Service in the Caribbean

Type: FRP Wear Pads
Size: 2″ – 4″ Dia. | 6″ – 12″ Long | 1/2″ Thick
Material: Vinyl Resins
Testing: Standard Visual and Dimensional Tests

PT&P fabricated 160 FRP wear pads for an LNG facility in the Caribbean. The wear pads are for pipes ranging from 2” to 4” in diameter 6” to 12” long and 1/2” thick. They are fabricated from vinyl resins and are designed for operating temperatures up to 400°F. The FRP pads are secured to the pipe using an epoxy adhesive to protect the uninsulated pipe from the support structure. Standard visual and dimensional tests were performed prior to shipment.

Read More

FRP Wear Pads for Corrosion Protection on Uninsulated Piping Systems
February 18, 2019

FRP Wear Pads for Corrosion Protection on Uninsulated Piping Systems

Type: FRP Wear Pads
Size: Pipe Sizes: 2″, 3″, 4″, 6″, 10″, 12″, and 16″
Length: 4″, 6″, 10″, and 12″ (can provide sizes up to 48″)
Material: Vinyl Resins
Design: Up to 400°F
Testing: Standard Visual and Dimensional Tests

PT&P fabricated 323 FRP wear pads for an oil refinery in Texas. The wear pads are for pipe sizes of 2″, 3″, 4″, 6″, 10″, 12″, and 16″, and vary in lengths of 4″, 6″, 10″, and 12″. They were fabricated from vinyl resins, and are designed for operating temperatures up to 400°F. The FRP pads are secured to the pipe using an epoxy adhesive to protect the uninsulated pipe from the metal support structure. Standard visual and dimensional tests were performed prior to shipment.

Read More

Riser Clamps for 54″ FRP Pipe
September 29, 2009
Riser Clamps with Neoprene Lining for 54" FRP Pipe
Riser Clamps with Neoprene Lining for 54" FRP Pipe
Riser Clamps with Neoprene Lining for 54" FRP Pipe
Neoprene Lining

The riser clamps are 54″ in diameter and custom designed to be installed in the Emission Control Unit of a 1600 MW coal fired power plant in Texas. The clamps include neoprene lining adhesively bonded to the carbon steel to protect the FRP pipe. Prior to assembly, the riser clamps received a coat of Red Alkyd Primer to prevent rust and resist moisture and corrosion.

Riser Clamps with Neoprene Lining for 54" FRP Pipe
Riser Clamps Being Shipped

Do you see a need for similar clamps in your plant? Get pricing today!


request-a-quote

Read More

Polyurethane Saddle Supports for FRP Pipe
April 2, 2008
Polyurethane Saddle Supports for FRP Pipe
Polyurethane Saddle Supports for FRP Pipe
Polyurethane Saddle Supports for FRP Pipe
Polyurethane Saddle Supports for FRP Pipe

Piping Technology & Products, Inc. designed and fabricated these saddle supports to support FRP pipe or similar plastics in sizes from 2″ to 36″ in diameter. The saddle support is fabricated from a molded density 20 polyurethane block with a load bearing capacity of 150 PSI that allows for high loads for a 36″ diameter line.

The base is bonded to a 20 gauge steel pan that provides a steel to steel resting surface. The foam is extended on each side of the base to allow field strapping of the support to the pipe. These saddle supports are often used in a circulating water service. These particular supports are to be used in a power generating station in the U.S.

Do you require similiar saddle supports for your application? Let us price them for you!
request-a-quote

Read More

84" Diameter Seawall Outfall Flow Regulating Device
August 20, 2004
84" Diameter Seawall Outfall Flow Regulating Device
Installation of FRP Bundles in the Pipe
84" Diameter Seawall Outfall Flow Regulating Device
84" Diameter Seawall Outfall Flow Regulating Device

Sweco Fab, Inc. recently designed and manufactured a 30,000 lb. Seawall Outfall Flow Regulating Device for a sea water outlet in Qatar. This 320 long flow conditioner is designed to allow water to flow through evenly. There are nineteen 16 FRP pipes inside an 84 diameter carbon steel pipe. The pipe bundle is secured within the 84 diameter shell pipe using spring washers, which keep the bundle tight and allows for differential expansion between the steel and FRP.

84" Diameter Seawall Outfall Flow Regulating Device
Installation of Flow Device On-Site

 

84" Diameter Seawall Outfall Flow Regulating Device
Flow Device in Use

Want to learn more about the other products fabricated by Sweco Fab? Instantly view a Sweco Fab webinar today!


access-our-webinar-archives



Read More
Top