High Temperature Pre-Insulated Pipe Supports with Slide Plates for an Ethylene Production Plant in Texas

March 27, 2018

High Temperature Pre-Insulated Pipe Supports For An Ethylene Production Plant In Texas

Type: High Temperature Pre-Insulated Pipe Supports with Slide Plates
Size: 15″ Long | 23″ Wide | 4.5″ Insulation
Material: Calcium Silicate, Firetemp®, Carbon Steel with HDG, UHMW Polyethylene
Design: 750°F, 1,325 lb Operating Load, & 12″ Pipe Size
Testing: Standard Quality Control

PT&P custom designed these pre-insulated pipe supports for high temperatures at an ethylene production facility in Texas. The hot shoes are 15″ long and 23″ wide with 4.5″ thick insulation. The insulation is comprised of calcium silicate and Firetemp®. The hot shoes were fabricated from carbon steel with a hot-dipped galvanized finish and the slide plates from UHMW Polyethylene. They are designed as a 2-way guide than can support loads in two directions. They are designed for a pipe size of 12″ in diameter with an operating temperature above 750°F and on operating load of 1,325 lb. Standard quality control tests were performed with a 4-week turn-around time.

Top