Injection-Molded Anchors for an LNG Plant

June 27, 2007
Injection-Molded Anchors For An Lng Plant
Injection-Molded Anchors for an LNG Plant
Injection-Molded Anchors For An Lng Plant
6″ NPS Anchors

These supports are used in a re-gasification terminal and are designed for -29°C ambient and -196°C fluid temperatures. The polyurethane foam insulation is injected into a mold with a pipe spool in place to ensure maximum fit. The pipe anchors are made from 516 Grade 70-N carbon steel. These supports were put through Finite Element Analysis and inspected by our Quality Control Department.

42″ NPS 20″ NPS 6″ NPS
Axial Load: 136,000 lb. 62,500 lb. 9,773 lb.
Vertical Load: 40,000 lb. 14,773 lb. 5,682 lb.
Lateral Load: 15, 909 lb. 11, 364 lb. 2,273 lb.
Foam Density: 32 lb. PCF 32 lb. PCF 20 lb. PCF

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


Access-Our-Webinar-Archives



Top