Expansion Joint Application and Design Course:
This course covers how to provide flexibility in the piping system by employing expansion joints to accommodate thermal expansion and contraction of sections of pipes or ducts.
Learn more about the Expansion Joint Course and more
| Type: | Constant Spring Supports |
| Size: | 25″ in Height x 17-38″ in Length x 11-5/8″ in Width |
| Material: | A-36 Carbon Steel with HDG Finish |
| Design: | 981 lb. to 1828 lb. load | 2-1/2″ to 3″ Vertical Movement Range |
| Testing: | Standard Load and Travel Testing per MSS Standards |
Piping Technology & Products, Inc. designed and manufactured C-type constant spring support assemblies for a refinery in Texas. The constants are 25″ in height, 17-3/8″ in length, and 11-5/8″ in width. Their load capacities range from 981 lb. to 1828 lb., with a vertical movement ranging from 2-1/2″ to 3″. All constants were fabricated from A-36 carbon steel with a hot-dipped galvanized finish, and underwent standard load and travel testing per MSS Standards prior to shipment.
Read MoreAt PT&P, safety always comes first. It’s National Safety Month so we took some time to visit with our top, industry-rated Safety Department and find out first-hand from the experts how they help us all keep each other safe.
|
PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.
Read More
|
These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.
Read More
|
Piping Technology & Products custom designed these structural supports to provide base support for pipes at a liquid natural gas (LNG) facility in Louisiana. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. Sizes range from 6″ x 12″ to 6″ x 18″ and all supports underwent a quality control inspection prior to shipment.
Read More
|
Piping Technology & Products designed these trapeze roller hangers for a food processing facility in Kentucky. These rollers range from 2-5/8″ to 16-3/8″ in length and 4″ to 16″ in diameter. They are comprised of cast iron roll and sockets, steel roll rod, continuous thread rods and hex nuts. The rollers are for pipe sizes ranging from 2″ to 16″ and load ratings from 600 to 3,970 lb. Standard quality control inspections were performed prior to shipment.
Read More
