List | Piping Technology & Products, Inc.

Hydraulic Snubber vs. Mechanical Snubber

March 11, 2011

Have you ever wondered which type of snubber to select for your piping system? Should you pick a hydraulic snubber or should you pick a mechanical snubber? Which one is right for your application? This seems to be a common concern for quite a few of our customers, so we have just recently published an article that discusses the pros and cons for both hydraulic and mechanical snubbers. Check out the article, Suitability of Snubbers for Various Applications.

Hydraulic Snubber Assemblies for a LNG Processing Facility in Peru

Do you require snubbers for a current or upcoming project? Get pricing today!

New Instrument Support Catalog

March 5, 2011

We have a new recently revamped instrument supports catalog! Our online catalog has a variety of new features that allow you to easily browse through our assortment of instrument stands:

– New color photos of instrument supports

– Selection chart to easily pick the best instrument stand for your application

– New indexes with thumbnails to quickly view a variety of supports

– Improved navigation to easily browse the site

Head on over to our site to check it out! Instrument Supports Catalog

Custom Designed Elevated Hold-Down Clamp Assembly Fabricated for a 54" Suction Line in a Gas Plant

February 28, 2011

Drawing of Complete Assembly (including hold-down clamp, pedestals and beams)

The 54″ suction line carrying gas to a gas compressor at a rate of 1.7 million lb./hr. developed a severe vibration. The deflections in the line were up to 3/4″ and it was fully observable during operation.

PT&P designed and manufactured a special elevated hold-down clamp, including a unique laminated vibration dampening lining. The entire pipe hanger assembly stands 22′ high and is coated with a carboline zinc finish. After installation and resumption of operations, the vibrations are now almost imperceptible.

Want to learn more about pipe clamps? View a recording of our pipe clamp webinar now!

Large Custom "Sling" Support and Horizontal Traveler Assemblies for an Oil Refinery

February 21, 2011

Three custom “sling” support assemblies fabricated from stainless steel were designed for an oil refinery in Louisiana. The assemblies are comprised of a 79.25″ diameter custom saddle support and two horizontal travelers (Fig.270 PTP-4). They are capable of loads up to 44,000 lb., and were designed, fabricated and shipped in four weeks for expedited delivery.

Do you have a requirement for a large custom designed product? Get pricing today!

Hydraulic Snubbers (Fig. 511 AD) with Protective Boots Designed for a Hydro-sulfuric Acid Environment in a Geothermal Power Plant

February 14, 2011

Fronek Anchor/Darling, a division of PT&P, designed and manufactured hydraulic snubbers with protective boots for a hydro-sulfuric acid environment in a geothermal power plant. They measure 53-5/8″ pin-to-pin with a 3-1/4″ cylinder bore size and 6″ stroke.

The snubbers are designed for an actual load of 15,400 lb., but have a rated load capacity of 20,000 lb. They are fabricated from carbon and alloy steel, and include two coats of epoxy-based paint. An activation velocity test was performed, along with a release rate and drag characteristics test.

Need further assistance selecting your snubber?
> contact our team of engineers
> submit a request for quote
> view more information on Snubbers

100-C Constant Spring Supports with Double Lug Suspension and Chained Travel Stops for an Oil Refinery in Canada

January 31, 2011

These figure 100 C-type constant springs were manufactured from A36 carbon steel for an oil refinery in Canada. Each constant was designed for 7″ of travel with a load of 35,144 lb. They measure 21.5″ W x 42″ L x 80″ H, and were specially designed to match a competitor’s dimensions in order to fit in the required application.

Do you require constant spring supports for your piping system? Get pricing today!

Why perform a walk-down in your plant?

Ever wondered just how important it is to regularly walk through your plant to ensure proper functionality of all pipe supports in the piping system? Understanding the critical nature of properly functioning pipe supports and how they contribute to the overall system, one should thoroughly inspect each component for proper operation during different phases of the life of the unit.

Inspecting a Constant in the Field — Inspecting a Constant During a Plant Walk Down

Check out a recent article we published on the Importance of a Plant Walk Down. Learn what to check for and when to perform certain types of plant walk downs. Use these tools to avoid a failure or potentially catastrophic situation. See Full Article

Insulated Pipe Supports for Temperatures as Low as -260°F for a 30" Diameter Pipe in a LNG Receiving & Regasification Plant and Refinery

January 25, 2011

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30″ diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27″ length by 44″ height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

Constant Spring Supports with Corrosion Resistant Coating Manufactured on a Rush Basis for Off-shore Drilling in Malaysia

January 17, 2011

——————————————————————————————————————————

A “U-Type” and 6 “C-Type” constant spring supports were designed to support piping in a corrosive environment located off-shore in Malaysia. The U-Type measures 21″ x 25″ x 57″ and C-Types range in size from 11-5/8″ x 17″ x 4″ to 18-3/4″ x 32″ x 80″.

The constants are fabricated from A36 carbon steel with a fluorocarbon coating on the pins. The frame, housing, and all components were coated with a 3-coat paint system to resist corrosion. Standard load and travel tests were performed prior to shipping the constants on a rush basis.

Want to learn more about constant springs? Instantly view a past webinar on constants now!

ASME Code Pig Launchers and Receivers with a Safety Locking System

January 3, 2011

The pig launchers and receivers were designed for a coal-bed methane gas production facility in Colorado. They are equipped with an integral safety locking system which works on the principle of mechanical key interlocking (transfer of keys). This system avoids serious injuries from human error and insures safety of personnel.

One starter key per launcher/receiver is kept in a box located in the control room. Each lock is executed with two keys. When the first valve is opened with this starter key, it releases the second key. This key is transferred to next valve which releases second key from that valve and so on and so forth. This process guides the operator through the specified sequence for opening and closing valves with unique a key for each step.

Do you see a need for pig launchers in your piping system? Request pricing today!

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

[Contact Info]

Our Subsidiaries

[Social Media]

Blog