- ASME pressure vessel
- 60″ diameter , 176″ seam to seam
- SA 516-70 shell
- SA 105 nozzles
- Design conditions: 75 PSIG @ 400°F
- Corrosion allowance: 1/4″
Do you have an upcoming requirement for a tank or ASME vessel? Get pricing today!
Do you have an upcoming requirement for a tank or ASME vessel? Get pricing today!
An assortment of standard variable spring supports were manufactured ranging in size from 8-5/8″ to 12-3/4″ dia. with installed heights ranging from 9-7/16″ to 18-1/8″. The F-Type pipe hanger assembly is used to support the pipe from below and are typically mounted to concrete pads via anchor bolts or welded to structural steel. The various springs shown are designed for operating conditions ranging from loads of 1750 lb. with .02″ travel to 21,280 lb. loads with .13″ travel. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.
Do you see a need for variable springs in your piping system? Let us price them for you!
Check out our most recent article that looks at the history of insulated pipe supports through the past 100 years. Learn about the developments made in the 1950’s and 1960’s that introduced the use of “Foam Glass”, a lightweight material that is manufactured primarily from recycled glass and used in the design of insulated pipe supports. Later, polyurethane was developed to provide greater load carrying capabilities. Read the full article on the:
Want to learn more about pre-insulated supports? Instantly view a past pre-insulated support webinar now!
Over 30 cryogenic supports fabricated from a combination of carblon steel, permali® block and stainless steel were manufactured for an LNG plant in Abu Dhabi. The shoes measures 18″ x 14″ x 12″ and are designed for 10″ of thermal movement and temperatures as low as -167°C. The cold shoes are coated with a custom paint job and went through standard testing prior to shipment.
Have a need for cryogenic supports in a current or upcoming project? Get a quote today!
We recently posted a new Snubber article on our website. It provides a technical look into both hydraulic and mechanical snubbers – how they are used in a piping system and how they function. Most importantly, the article tells you the difference between various types of snubbers which is helpful in choosing the appropriate snubber for your piping system needs.
Want to learn more about snubbers? Watch a recording of a past snubbers webinar now!
Ever wonder what makes a constant spring support different from a variable spring support? How does each one function? How do they support loads and allow for movement in a pipeline? Check out our new spring support article that provides all the answers to these questions and more.
Want to learn more about constants? Instantly view a past constants webinar now!
Read MoreThis big ton spring support measures 40″ length x 36″ width x 43″ height. It is composed of a carbon steel frame, neoprene coated spring steel coils, and has a hot-dipped galvanize finish. It also includes a guided load table to ensure stability when supporting the maximum load of 93,000 lb. Standard load and travel tests were performed prior to shipping.
Do you see a need for big tons springs in your piping system? Get pricing today!
20 vessel supports ranging in length from 30″ to 84″ were manufactured for an oil refinery in Texas. The structural supports will be attached to existing vessels to assist in supporting the nearby pipes and piping system. The supports were fabricated from carbon steel and coated with a hot-dipped galvanize finish to prevent corrosion.
Need to replace or add extra support to your piping system? Let us price it today!
Read MoreThis 200 E-Type horizontal constant spring support is fabricated from carbon steel with a
hot-dipped galvanize finish. It is designed for a 54,020 lb. load with a total travel of 15.5″. The 3-bolt pipe clamp is designed for a 26″ diameter pipe and is coated with a red oxide primer. Each pipe hanger assembly went through standard load and travel testing prior to shipping. PT&P will design and fabricate any size constant spring support in addition to the sizes listed in our catalog.
Want to learn more about spring supports or clamps? Instantly view a past webinar now!