Piping Technology & Products, Inc. attended the 8th annual ASME Plant Engineering, Inspection and Maintenance Trade Show at the Pasadena Convention Center in Pasadena, Texas on Thursday, April 22, 2010. Joel from Chevron stopped by the PT&P booth and won a Kodak C190 12mp digital camera. Congratulations Joel!
Read More
This cold shoe is manufactured from carbon steel and has 2-1/2″ thick polyurethane insulation. It is designed to support a vertical load of 2700 lb. and can withstand a temperature range from -100°F to 70°F. The cold shoe will be used in a 60″ diameter thermal energy storage tank for power generation.
Want to learn more about cold shoes? Instantly view a past cold shoe webinar!
A total of 18 big ton springs of various sizes were fabricated from A516 Gr. 70N carbon steel. The big tons were designed in a rectangular configuration in order to match the existing vessel saddle supports and the concrete foundation below the springs. PTFE, 25% glass filled slide plates will be welded on the load flanges to allow horizontal movement in addition to the vertical movements specified. The largest of the big ton assemblies has an operating load of 79,000 lb. with a travel of .706″ down.
Want to learn more about big ton springs? Watch a recording of a spring support webinar now!
PT&P manufactured constant spring supports to custom dimensions of 21″ height x 13″ width x 7.5″ depth. The total travel is 7″, with an actual travel of 3.5″ in both up and down directions. The rated load is 180 lb. and they will be used to support pipe lines for a power plant in Louisiana.
Do you see a need for constant hangers in your plant? Get pricing today!
The sway braces will be used in pairs to support a 72″ diameter cooling tower supply line via a common attachment point. The internal components and housing are fabricated from carbon steel, and A-5160 spring steel was used for the coil. Each sway brace has a spring rate of 10,100 lb/in. with an overall available travel of 3″. The adjustable ends are configured so that one end bracket is interlocked with the mating end bracket of its sister sway brace; therefore, enabling them to be connected to the pipe by a single lug.
Do you require sway braces for an upcoming project? Let us price them for you today!
PT&P manufactured 55 instrument stands from carbon steel with a hot-dipped galvanize finish. They are 75″ tall and 90″ wide, and will support various instruments and junction boxes in a heavy oil refinery.
Want to learn more about instruments stands? Watch a instant webinar on our miscellaneous fabricated products!
These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.
Want to learn more about cold supports? Watch an instant webinar on cold shoes!
All four riser clamps are manufactured from A-36 carbon steel plates and are coated with red oxide primer for rust prevention. They are 22″ in diameter with each plate measuring 2″ thick by 12″ wide by 65″ long. Each riser clamp is capable of supporting loads of up to 38,000 lb. and will be used in a power plant to support “downcomer” lines.
Do you see a need for riser clamps in your current or upcoming project? Let us price them now!
PT&P manufactured 72″ dia. insulated supports for temperatures as low as -260°F. The insulation is multi-layered comprised of polyurethane foam with a density of 20 PCF, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel. The shoes will be used to support and insulate piping in a receiving & regassification plant and refinery.
Do you require cryogenic insulated supports in your piping system? Get pricing now!
The operating temperature for these cryogenic shoes ranges from -290°F to 90°F. They are designed for 56″ diameter pipe and are capable of supporting loads up to 40,000 lb. The insulation is multi-layered comprised of 20 PCF polyurethane, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel.
Read More