Constants for Energy Plant in Louisiana

July 1, 2005
Constants For Energy Plant In Louisiana
Constants for Energy Plant in Louisiana

Piping Technology & Products, Inc. custom designed and manufactured Type 200-C constant springboxes for an energy plant in Louisiana.

The constant measures 23 x 40 designed for an operating load capacity of 8,300 lbs. and a total travel range of 8. The constant is fabricated of A36 carbon steel. To ensure quality,
standard load and travel tests were performed prior to shipping.

Do you see a need for constant spring supports in your piping system? Get pricing today!
Request-A-Quote


Read More

Structural Support Units for a Power Plant in California

June 24, 2005
Structural Support Units For A Power Plant In California
Structural Support Units for a Power Plant in California

Piping Technology and Products, Inc. recently designed and fabricated two structural support units for a power plant in California.

The structural supports pipes are made of A106 Gr. B; the beam, angle and plate are made of carbon steel. They have an overall height of 11 feet with a weight of 672 lbs. The purpose of these products is to support a 3 inch intermediate pipe.

Do you see a need for structural supports in your current job? Get pricing today!
Request-A-Quote


Read More

Pipe Shoes for an Energy Plant in Canada

June 17, 2005

 

Pipe Shoes For An Energy Plant In Canada
Pipe Shoes for an Energy Plant in Canada
Pipe Shoes For An Energy Plant In Canada
Isometric View of Shoes

Piping Technology & Products, Inc. recently designed and manufactured 566 pipe shoes for an energy plant in Canada.

These fabricated pipe shoes are manufactured to support pipes. The pipe shoes are fabricated out of A36 carbon steel with sizes ranging from 12 to 36. They have an overall weight of 134,000 lbs.

Do you require pipe shoes like those described above? Let us price them for you now!
Request-A-Quote


Read More

68 Sliding Cold Shoes with Lateral Restraint

June 10, 2005
68 Sliding Cold Shoes With Lateral Restraint
68 Sliding Cold Shoes with Lateral Restraint

Piping Technology and Products, Inc. recently fabricated and designed several sliding cold shoes with lateral restraint for a river site in Georgia. The sliding cold shoes have a frame of A36 carbon steel. These were designed to support pipes of 14 to 36 in diameter, insulated with 4.5 to 5 in thick layers of polyurethane foam.

Want to learn more about cold shoes? View a past pre-insulated support webinar!



Access-Our-Webinar-Archives



Read More

Eight Custom-Built Variable Springs for a Power Plant

June 3, 2005
Eight Custom-Built Variable Springs For A Power Plant
Eight Custom-Built Variable Springs for a Power Plant

All of the spring components are made of A4150H and carbon steel. Per customer’s request, a two coat epoxy paint was applied to the springs. The Type-A variable spring assemblies measure 22″ x 79″ with an installed load of 45,000 lb., operating load of 56,000 lb., and a downward travel of 5″. The Type-C assemblies measure 22″ x 89″ with an installation load of 38,000 lb., operating load of 47,000 lb., and a downward travel of 5 1/2″. Each spring coil was tested to insure the wire diameter, coil height, and spring rates.

Do you see a need for variable springs in your piping system? Get a price quote today!


Request-A-Quote


Read More

Eight Polyurethane Pipe Rollers for a Gas Plant

May 20, 2005
Eight Polyurethane Pipe Rollers For A Gas Plant
Eight Polyurethane Pipe Rollers for a Gas Plant

Piping Technology & Products, Inc. designed and manufactured eight polyurethane pipe rollers for a gas plant in California. These 24 non-conductive pipe rollers are fabricated from polyurethane. They were pre-tested for an operation load of 6,100 lbs. The purpose of these polyurethane pipe rollers is to support gas piping where a non-conductive support is required.

Do you require pipe rollers in your piping system? Let us price them for you today!
Request-A-Quote


Read More

Eight Cold Shoes for Plant in Egypt

May 13, 2005
Eight Cold Shoes For Plant In Egypt
Eight Cold Shoes for Plant in Egypt
Eight Cold Shoes For Plant In Egypt
Unassembled Cold Shoes

Piping Technology & Products, Inc. custom designed eight cold shoes for a plant in Egypt. The pipe diameters of these shoes range from 10 to 18, and they weigh up to 2300 lbs. These cold shoes were designed to support a vertical cold line. The maximum load for this product is 28,000 lbs. These products were made from Micarta G10, A240 304L and A36.

Want to learn more about cold shoes? View a past pre-insulated webinar today!


Access-Our-Webinar-Archives



Read More

Custom Designed and Manufactured Box Design Constants

April 29, 2005
Custom Designed And Manufactured Box Design Constants
Custom Designed and Manufactured Box Design Constants
Custom Designed And Manufactured Box Design Constants
Front View

These constants are manufactured from A36 carbon steel and measure 11″ x 29″ x 61″. Total weight of each constant is 430 lb. The loaded capacity is 2,160 lb. and the maximum travel is 15″. Standard load and travel test were done to ensure quality and performance. The turn around for this product was four days.

Custom Designed And Manufactured Box Design Constants
Side View

 

 

 

 

 

 

Do you require custom constants for your piping system? Get a price quote today!
Request-A-Quote


Read More

24" x 30" diameter, 740 PSIG Pig Launchers and Receivers

April 22, 2005

 

24&Quot; X 30&Quot; Diameter, 740 Psig Pig Launchers And Receivers
24" x 30" diameter, 740 PSIG Pig Launchers and Receivers

The launchers and receivers, with dimensions of 24″ x 30″ x 138″ long and 10″ x 14″ x 132″ long, are designed for 740 PSIG at 170 degrees. One of the Pig Launchers and Receivers composed of a 24″ dia. minor barrel and a 30″ dia. major barrel, while the other one consisted of a 10″ dia. minor barrel and a 14″ dia. major barrel. The major and minor barrels are fabricated from API 5L X 52. To ensure quality, the Launchers and Receivers were 100 % x-rayed and hydro-tested prior to shipment.

Pig Launchers and Receivers are installed in pipelines to launch and receive Pipeline Pigs. Pigs can be used for the cleaning of pipelines. In addition, Pigs can be used for the separation of two products within the same pipeline. Sweco Fab/Piping Technology & Products, Inc. has over 40 years of experience in designing and manufacturing a wide variety of ASME/Misc. Fabricated Products – including Pig Launchers and Receivers.

Do you see a need for pig launchers in your piping system? Get a price quote today!
Request-A-Quote


Read More

58,000 lb. Load Constant Hangers for an Oil Refinery

April 15, 2005
58,000 Lb. Load Constant Hangers For An Oil Refinery
58,000 lb. Load Constant Hangers for an Oil Refinery

 

58,000 Lb. Load Constant Hangers For An Oil Refinery
58,000 lb. Load Constant Hangers for an Oil Refinery

Piping Technology & Products, Inc. recently custom designed and fabricated PTP Fig. 200 Constant Hangers for a coker unit in St. Croix.

These supports, with operating loads ranging from 4,000 lb. to 58,000 lb., will be used to support flue gas ducts at the oil refinery. The overall lengths of the Horizontal Constants are 5′ to 7′, and the heights of the Vertical Constants ranged from 4′ to 6′. The combined weight of the constants totaled over 24,000 lb. Color-coded rivets for hot and cold loads and universal locking devices are also installed per customer’s request.

Do you require constant load hangers in your piping system? Let us quote them for you today!
Request-A-Quote


Read More
Top