March 29, 2002
Piping Technology & Products, Inc. designed and fabricated several pipe shoes with loads up to 75,000 lbs. respectively, for a 750MW power plant in Alabama.
The shoes are to support the cooling towers’ circulatory water system at the power plant. The majority of the shoes were designed for a 60″ line and 50,000 lb. load, and the remaining few were designed for a 78″ line and 75,000 lbs. of load. After extensive engineering hours and structure analysis, PT&P’s engineering department was able to produce a detailed design and 3-D model for the supports that would allow them to run electronic interface checks.
Do you need pipe shoes? Get pricing today!
