U.S. Bellows (a division of PT&P) Exhibits at the 2010 NPRA Cat Cracker Seminar

August 25, 2010

 

Sales Associate With Vp Rakesh Agrawal

The U.S. Bellows exhibit featured a cut-away view of an expansion joint with insulating and abrasion resistant refractory lining and miniature models of various types of metallic expansion joints. Discussions at the booth included how to solve regenerated catalyst and spent catalyst standpipe expansion joint reliability problems. Talk to the engineers at U.S. Bellows about your flue gas expansion joint problems. We can help with your fabric expansion joint problems in low pressure flue gas systems.

Read More

February 2010 News

February 5, 2010

PT&P is Now Certified with Texas Board of Professional Engineers
Texas Board Of Professional Engineers CertificatePiping Technology & Products, Inc. has been approved for registration with the Texas Board of Professional Engineers.

View Texas Board of Professional Engineers Certificate

In an effort to ensure safe engineering practices throughout the State of Texas, the Texas Board of Professional Engineers has acknowledged that Piping Technology & Projects meets the necessary qualifications to provide professional engineering services and has therefore awarded PT&P a certificate stating its eligibility.

Read More

November 2009 News: PT&P is Awarded the ISO Certificate

November 25, 2009

PT&P is Now ISO 9001:2008 Certified (11-23-2009)
Piping Technology & Products, Inc. is awarded the ISO 9001:2008 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.

Iso 9001:2008

View ISO 9001:2008 Certificate

The latest version of standards, ISO 9001:2008 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.

Read More

July 2008 News

July 17, 2008

We are now hosting Webinars regarding products and services by Piping Technology & Products, Inc. and our wholly owned subsidiaries:

  • U.S. Bellows, Inc.
  • Sweco Fab, Inc.
  • Pipe Shields, Inc.
  • Anchor Darling, Ent.

Collectively we offer: Expansion Joints, Variable Spring Hangers, Constant Supports, Big Tons, Snubbers, Sway Braces, Sway Struts, Pipe Hanger Hardware, Clamps, Rods, Slide Bearing Plates, Misc. Steel Fabrication, ASME Code Pressure Vessels, Fabricated Pipe Shoes, Guides, Anchors, Instrument Supports, Pipeline “Pigs”, Launchers/Receivers, Insulated Shoes/Supports-Hot/Cold, Hold-down Clamps, “High Temp” Furnace Bags, Anchor Bolts/Embeds, Bellmouth Reducers, Inspection, Analysis, or Training Services, Field Service and Stress Analysis/Product Testing.

Sign up for our current webinar today!

Read More

February 2008 News

February 20, 2008

PT&P’s Technical Information is Now Easier to Browse

Bd21298 Information on Products/Services:
Bd21298 Expansion Joints and Bellows
Bd21298 Fatigue Testing and FEA Analysis
Bd21298 Inspection and Maintenance
Bd21298 Vibration Controls
Bd21298 Engineered Pipe Supports
Bd21298 Slide Bearing Plates
Bd21298 Fabricated Pipe Shoes and Anchors
Bd21298 Organized by Product/Service Category
Bd21298 Simply Browse Cover Images
Bd21298 Click to View Printable PDF Version
Bd21298 Download for Adobe Acrobat Reader

View Technical Bulletins on our Site

Read More

October 2007 News

October 15, 2007

PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.

View Benefits of ISO 9001:2000

View ISO 9001:2000 Certificate

Iso 9001;2000
ISO 9001:2000

The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.

Read More

September 2004 News

September 1, 2004

Piping Technology & Products, Inc. Acquires Companies from the Shaw Group, Inc

Houston, Texas, USA (August 31, 2004)-Piping Technology & Products, Inc. is proud to announce the acquisition of the essential assets and the manufacturing and engineering capabilities of the following companies from The Shaw Group Inc. (NYSE:SGR):

1. Shaw Fronek Company (FCI) Inc., Englewood, New Jersey

2. Shaw Pipe Supports Inc., Shreveport, Louisiana

3. Shaw A/DE, Inc., Laconia, New Hampshire

4. Shaw Pipe Shields, Inc., Vacaville, California

The Shaw Group has long been providing cost effective products for the power, petrochemical, chemical and commercial markets. PT&P is committed to upholding the standards that Shaw has set forth and will strive to make continuous improvement of all products and services. PT&P will work to understand and meet the requirements of new customers, as well as professionally execute all contracts acquired from Shaw.

“Piping Technology & Products is extremely excited about this acquisition,” said PT&P President Durga D. Agrawal. “The assets of these four companies strengthen our position as a leading producer in pipe hangers, mechanical and hydraulic snubbers, pre-insulated pipe supports and expansion joints.”

PT&P is consolidating the assets of some of the companies to the main location at 3701 Holmes Road, Houston, Texas 77051. The company can be reached via email at info@devptp.fronekgrp.com, by fax at 713-731-8640 or by calling 713-731-0030 or 800-787-5914. PT&P can also be visited on the web at www.pipingtech.com.

This acquisition allows PT&P to enhance the existing product lines thus offering greater value and selection. The acquired companies will operate under the following company names:

1. Fronek Company (FCI), Inc.

2. FCI Pipe Supports, Inc.

3. Fronek Anchor/Darling Enterprises, Inc.

4. Pipe Shields, Inc.

About Piping Technology & Products, Inc.
Piping Technology & Products, Inc. and its wholly owned subsidiaries, U.S. Bellows, Inc. and Sweco Fab, Inc. manufacture a variety of high-quality engineered products. In business since 1975, PT&P has close partnerships with leading engineering and construction companies and is recognized as a leader in designing and manufacturing pipe supports, pre-insulated pipe supports and expansion joints. PT&P and its subsidiaries strive to, “DO IT RIGHT THE FIRST TIME, EVERY TIME” by providing quality products and expert service.

About The Shaw Group Inc.
The Shaw Group Inc. is a leading global provider of technology, engineering, procurement, construction, maintenance, fabrication, manufacturing, consulting, remediation, and facilities management services for government and private sector clients in the power, process, environmental, infrastructure and emergency response markets. A Fortune 500 company, The Shaw Group is headquartered in Baton Rouge, Louisiana, and employs approximately 17,000 people at its offices and operations in North America, South America, Europe, the Middle East and the Asia-Pacific region. For further information, please visit the Company’s website at www.shawgrp.com.

Read More

April 2004 News

April 4, 2004

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@devptp.fronekgrp.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

  • Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
  • Use a built-in function to submit drawing data to PT&P for quotation
Read More

April 2003 News

April 4, 2003

Keeping Ahead of the Competition

  • Highest, Consistent Performance Balance of Plant Piping Materials Award from Bechtel
  • Scored 100% on Calpine’s Monthly Alliance Quality Performance
  • Obtained ICBO Certification
  • U.S. Bellows is now a proud member of EJMA
Read More
Top