Piping Technology & Products New Foam Machine
June 6, 2016
Blog Category: PRE-INSULATED PIPE SUPPORTS
Cryogenic Pipe Supports Designed for an Air Separation Unit
A total of sixty-four pre-insulated pipe supports were designed for cryogenic temperatures in an air separation unit in China. The units are 12″ in length with 4.5″ thick polyurethane foam insulation. The cold shoes were designed with carbon steel shoe clamps and finished with a black epoxy and include polyethylene slide plates.Standard quality control and dimensional tests were performed prior to shipment.
Read MoreCryogenic Pipe Supports Designed for a Hydrocarbon Production Facility
September 8, 2015
PT&P custom designed pre-insulated pipe supports with polyurethane insulation for cryogenic temperatures in a light hydrocarbon production facility in Texas. A total of 59 cold shoes were fabricated from A36 carbon steel with a hot-dipped galvanized finish. The cold shoe assemblies range in diameter from 24″-48″ and were designed to support loads ranging from 17,000 to 31,000 lb. Standard Q.C. and dimensional tests were performed prior to shipment.
Read MoreRegister for the Pre-Insulated Pipe Supports Webinar (Cryogenic/High Temp.)
September 2, 2015
This webinar is over, view the recording at: Webinars
This presentation will cover Pre-Insulated Pipe Supports, including pipe insulation products for both cryogenic and heat applications. Learn about the different types of insulation materials and get the inside scoop on our cold shoe design. Explore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing.
The featured presenter, David Baker has over 12 years experience with pre-insulated pipe supports, on-site surveys, inspections, Installation and Maintenance. He is also the manager of PT&P’s Field Service division and our in-house consultant for pre-insulated pipe supports.
Read MoreTrunnions Designed with Insulation for an LNG Facility
August 23, 2014
PT&P designed cryogenic trunnions with 2″ thick G-10 block insulation for an LNG facility in Australia. The trunnions are fabricated from 10″, 12″ and 24″ diameter pipe. The upper sections are fabricated from stainless steel pipe and plate while the lower sections are carbon steel. These insulated supports are designed for temperatures down to -300°F and operating loads of 4,990 lb.
Read More30" Dia. Cryogenic Pipe Supports with PUF and Permali®Insulation for an LNG Facility
August 9, 2014
PT&P manufactured cryogenic pipe supports for a 30″ diameter pipeline in an LNG facility located in the UAE. These cold shoe anchors prevent axial and lateral movement at temperatures down to -300°F. The bearing plate is fabricated from carbon steel and the 5″ thick insulation is a combination of high density polyurethane foam (PUF) and Permali®.
Read MorePre-Insulated Pipe Supports Designed for High Temperatures in a Power Plant
June 22, 2014
Piping Technology designed hot shoes with sliding bases for a power plant in Mississippi. The assemblies will be installed on 28″ diameter pipe and include 1-1/2″ thick calcium silicate insulation. Manufacturing fabricated these supports from galvanized carbon steel with a polyethylene base. They are capable of an operating load of 7,200 lb., temperatures up to 1,200 degrees F and an axial movement of +/- 4-1/2″. The shipment was met three days prior to the critical field need date.
Read MoreInsulated Pipe Supports Designed for 6" Dia. Cold Temperature Piping
January 11, 2014
These insulated pipe supports are designed for 6″ diameter cold temperature piping for a gas refinery in Texas. They are fabricated with a carbon steel shell and 5″ thick polyurethane insulation. PT&P offers various types of insulated supports utilizing insulating materials designed for piping ranging in surface temperatures from -460°F to 1,200°F.
Read More215 Heavy Duty Pre-Insulated Pipe Supports Designed for a High Temperature Application
November 9, 2013
Pipe Shields Inc., a division of PT&P, manufactured 215 heavy duty pre-insulated supports for a high temperature application in Oregon. They are 15″ L x 20″ W x 31″ H and are designed to accommodate 14″ – 20″ diameter pipes. The hot shoes have a calcium silicate insulation thickness of 2.5″- 3″. The base, clamps, nuts, jackets and bolts are all fabricated from hot dipped galvanized carbon steel and coated with red oxide paint. Standard Q.C. and dimensional tests were performed prior shipment.
Read More42" Dia. Heavy Duty Insulated Pipe Support Anchors for a High Temperature Application
July 5, 2013
PT&P designed and fabricated heavy duty insulated pipe support anchors for a high temperature application. The base, clamps, nuts, jackets and bolts are all fabricated from hot-dipped galvanized carbon steel. The hot shoes have 3″ thick high density calcium silicate insulation, and are designed for 12″-42″ diameter pipes. The dimensions are 47″ L X 51″ W X 16″ H. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.
Read More