60" Diameter Cold Support for a Thermal Energy Storage Tank

April 20, 2010
60&Quot; Diameter Cold Support For A Thermal Energy Storage Tank
60" Diameter Cold Support for a Thermal Energy Storage Tank

This cold shoe is manufactured from carbon steel and has 2-1/2″ thick polyurethane insulation. It is designed to support a vertical load of 2700 lb. and can withstand a temperature range from -100°F to 70°F. The cold shoe will be used in a 60″ diameter thermal energy storage tank for power generation.

Want to learn more about cold shoes? Instantly view a past cold shoe webinar!
Access-Our-Webinar-Archives

Read More

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

March 9, 2010
Foam Glass – Puf Hybrid Cold Supports For 16″ Dia. Pipe
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.

Want to learn more about cold supports? Watch an instant webinar on cold shoes!
Access-Our-Webinar-Archives

Read More

72" I.D. Cryogenic Insulated Supports for a Project in Algeria

February 16, 2010
72″ I.d. Cryogenic Insulated Supports
72″ I.D. Cryogenic Insulated Supports

PT&P manufactured 72″ dia. insulated supports for temperatures as low as -260°F. The insulation is multi-layered comprised of polyurethane foam with a density of 20 PCF, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel. The shoes will be used to support and insulate piping in a receiving & regassification plant and refinery.

Do you require cryogenic insulated supports in your piping system? Get pricing now!
Request-A-Quote

Read More

Cryogenic Insulated Supports with Acoustic Pads for a Project in Algeria

February 9, 2010
Cryogenic Insulated Supports With Acoustic Pads
Cryogenic Insulated Supports with Acoustic Pads

The operating temperature for these cryogenic shoes ranges from -290°F to 90°F. They are designed for 56″ diameter pipe and are capable of supporting loads up to 40,000 lb. The insulation is multi-layered comprised of 20 PCF polyurethane, a vapor barrier, an aluminum metal jacket, and acoustic pads. The acoustic pads are installed around the cold shoe to absorb vibration. The base and bearing plates are fabricated from carbon steel.

Read More

164 Wide Base Sliding Insulated Supports for a Power Station

February 2, 2010
164 Wide Base Sliding Insulated Supports
164 Wide Base Sliding Insulated Supports

The hot shoes are fabricated from A-36 carbon steel with 304 stainless steel slide plates. The 18″ dia. hot shoe has a maximum vertical load of 5500 lb. and the 24″ dia. hot shoe is capable of loads up to 13,750 lb. All the supports in this project are designed for temperatures of up to 1200°F. In addition to the insulation, these supports are capable of sliding axially or laterally as part of the piping system.

Read More

25-7/8″ Diameter High Temperature Supports for a Rush Job

November 17, 2009
25-7/8″ Diameter High Temperature Supports For A Rush Job
25-7/8″ Diameter High Temperature Supports for a Rush Job

PT&P fabricated hot shoes with an insulation thickness of 2 ½” and a pipe size of 20″. The supports are fabricated from carbon steel with a red oxide finish and calcium silicate insulation. They are capable of loads up to 3400 lb. and temperatures ranging from 40°F to 1200°F. PT&P completed delivery for this rush job within two weeks.

Want to learn more about hot shoes? Instantly watch a pre-insulated support webinar today!

Access-Our-Webinar-Archives

Read More

58″ Diameter High Temperature Rotational and Axial Stop Insulated Supports

September 1, 2009
58&Quot; Diameter High Temperature Rotational And Axial Stop Insulated Supports
Quality Control Check

 

58&Quot; Diameter High Temperature Rotational And Axial Stop Insulated Supports
Rotational and Axial Stop Hot Shoe

Piping Technology & Products, Inc. manufactured high temperature rotational and axial stop insulated supports for styrene lines in a petrochemical complex. The supports have an overall outside diameter of 58″ and are capable of handling temperatures up to 1500°F. They are fabricated from a combination of carbon steel for the top and stainless steel for the bottom. The hot shoes include Belleville washers, an Inconel 800HT rotational insert assembly, and high density fire temperature insulation.

Want to learn more about pre-insulated supports? View a past pre-insulated support webinar!
Access-Our-Webinar-Archives

Read More

Pre-Insulated Base Supports for a LNG Plant

July 1, 2009
Pre-Insulated Base Supports For A Lng Plant
Pre-Insulated Base Supports for a LNG Plant
Pre-Insulated Base Supports For A Lng Plant
Front View

These low-temperature base supports are fabricated from carbon steel with a hot dipped galvanize finish and range from 23″ to 37″ in height. The supports are 18″ in diameter with a base plate of 20″W x 20″L x 1″H and are designed to support pipes ranging in size from 24″ to 30″. The base supports are fabricated with micarta insulation and will be utilized in a LNG plant as a base beneath a cold temperature pipe.

Do you require pre-insulated supports for your project? Get a quote today!
Request-A-Quote


Read More

48″ Guided Pre-Insulated Pipe Supports for High Temperatures

June 24, 2009
48&Quot; Guided Pre-Insulated Pipe Supports For High Temperatures
48" Guided Pre-Insulated Pipe Supports for High Temperatures

Pipe Shields, Inc., a subsidiary of Piping Technology & Products, Inc., designed these pre-insulated supports for a pipe size of 48″. The clamp and base are fabricated from carbon steel that includes a hot dipped galvanized finish. The 4″ thick insulation is a high density calcium silicate. These guided supports allow for a maximum axial travel of plus or minus 4 1/2″ and have a vertical load rating of 7,100 lb. The operating temperature of the pipe may exceed 1,200ºF, therefore the hot shoes are designed for 1,700ºF. These heavy duty base mounted pipe supports are specially designed to be installed on four emergency diesel exhaust mufflers in a hospital.

Do you need hot shoes for your current or future project? Get pricing today!
Request-A-Quote

Read More

84" Pre-Insulated Pipe Support for High Temperatures

September 24, 2008
84&Quot; Pre-Insulated Pipe Support For High Temperatures
84" Pre-Insulated Pipe Support for High Temperatures
84&Quot; Pre-Insulated Pipe Support For High Temperatures
Preparing the Hot Shoe Insulation

Designed for a pipe size of 84″, this pre-insulated pipe support is able to withstand temperatures up to 1,220ºF. It is a wide base sliding hot shoe with up to 2″ of axial travel and 3″ of lateral travel. It can support loads up to 33,721 lb. and the support itself weighs approximately 1,900 lb. This high temperature pre-insulated pipe support will be utilized in a styrene plant.

Want to learn more about pre-insulated supports? Watch a pre-insulated support webinar now!

Access-Our-Webinar-Archives

Read More
Top