Replacement Constant Spring Supports with Neoprene Coating for a Highly Corrosive Application at a Salt Water Cooler Tower

October 19, 2010
Original Supports (Not Fabricated By Pt&Amp;P)
Original Supports (not fabricated by PT&P)

PT&P received a call to inspect spring supports in operation at a salt water cooler tower. It was quickly determined that replacement supports would be needed due to the heavy corrosion of the original supports not fabricated by PT&P.

Neoprene Coated Fig. 200 U-Type Upthrust  Constant Spring Supports
Neoprene Coated Fig. 200 U-Type Upthrust Constant Spring Supports

A total of 40 constant and variable spring supports were fabricated as replacements. Each support was sealed with a neoprene coating over a hot-dip galvanized finish instead of stainless steel. This type of finish will ensure a much longer life-span. The spring supports ranged in loads from 800 lb. to 15,000 lb. with various travel ranges.

Neoprene Coated Fig. 100 U-Type Upthrust Constant Spring Supports
Neoprene Coated Fig. 100 U-Type Upthrust Constant Spring Supports

Do you need to replace some springs in your plant? Contact us for a quote today!
Request-A-Quote

Top