Piping Technology & Products is a manufacturer of all types of pipe supports to areas all over the world ranging from sports stadiums to geothermal to infrastructure applications. In fact, many of the items you will see on our website were developed for the specific requirements of a customer who could not use the standard designs available in our industry. These sway strut assemblies were designed and fabricated for a large LNG liquefaction and export plant. Sway struts are used in a wide range of applications in power plants, chemical and refineries to restrain movement in tension (or X plane) while allowing lateral movement (in the Y and Z plane). These fig. 2100F, size C sway struts are designed with 4” adjustment for loads up to 4,500 lb. The pins are fabricated from a high alloy steel for added strength and the threaded rod ends are carbon steel and hot-dipped galvanized. The sway strut body was hot-dipped galvanized after the donut and pipe were welded. The rod ends and end brackets were galvanized a second time for added corrosion resistance after the holes for the IKO bearings and pins are enlarged to fit these component parts. The C-C dimension is 30-11/16” and a quality control inspection involving thread engagement was completed prior to shipment. Piping Technology and Products is a manufacturer of all types of pipe supports to areas all over the world ranging from sports stadiums to geothermal to infrastructure applications. In fact, many of the items you will see on our website were developed for the specific requirements of a customer who could not use the standard designs available in our industry. If you do not find what you need, or if you need technical advice, please contact us.
PT&P REF. ORIGINAL POST 06222021
