Hold-Down Pipe Clamps

Hold-down pipe clamps are used in applications where you would like to either 1.) anchor the pipe in position or 2.) permit axial movement of the pipe. Slide plates, such as PTFE, 25% glass filled or graphite, can be incorporated into the design to reduce the friction between the pipe and clamp.

Ammonia Plant
Chemical Plant
Clean Fuels
Commercial

Electric Plant
Energy Facility
Ethylene Plant
LLDPE Chemical Plant

LNG Plant
MTBE Plant
Natural Gas Combined Cycle Facility
Natural Gas Processing & Separation

Oil Refinery
Oil Sand Mine
Paper Manufacturer
See All

GENERAL DIMENSIONS & SPECIFICATIONS

Download PDF

Fig. HD-1: Anchor Type Hold-Down

Fig. HD-1: Anchor Type Hold-Down for Pipe Line

For Pipe Sizes 2-6 inclusive For Pipe sizes 8-36 inclusive

MATERIAL: Carbon steel
FINISH: Black or galvanized
TEMP: 750°F
APPLICATIONS: Fig. PTP HD-1 is an anchor type hold down. This hold down is generally used on pipe lines where little or no insulation is required.
ORDERING: Specify figure number, pipe size and description.

PIPE SIZE A B C D E R T
2 9 3/8 3 3/16 2 3/8 3 1/2 15/16 1 3/16 1/4
3 10 1/2 3 3/4 3 1/2 3 1/2 1 1/2 1 3/4 3/8
4 11 1/2 4 1/4 4 1/2 3 1/2 2 2 1/4 3/8
6 13 5/8 5 5/16 6 5/8 3 1/2 3 1/16 3 5/16 3/8
8 16 6 1/2 8 5/8 3 11/16 4 1/16 4 5/16 3/8
10 19 8 10 3/4 4 1/8 5 1/8 5 3/8 3/8
12 21 9 12 3/4 4 1/8 6 1/8 6 3/8 1/2
14 23 10 14 4 1/2 6 3/4 7 1/2
16 25 11 16 4 1/2 7 3/4 8 1/2
18 27 12 18 4 1/2 8 3/4 9 1/2
20 29 13 20 4 1/2 9 3/4 10 1/2
24 33 15 24 4 1/2 11 3/4 12 1/2
30 39 18 30 4 1/2 14 3/4 15 1/2
36 45 21 36 4 1/2 17 3/4 18 1/2

 

 

Hd1a

Top